Glueing keypads to base?

Comments specifically about the keyboard devices.

Moderator: The00Dustin

Post Reply
Posts: 14
Joined: 22 Oct 2005, 21:28

Glueing keypads to base?

Post by fubar »

I wonder what glue would be best to attach. We want sturdy attachment to minimise ribbon cable movement, but retain the option of detaching the thing again if necessary for repair.

Superglue: problems with un-glueing?
Epoxy: ditto?

What do you think?
Smarty Pants
Posts: 131
Joined: 27 Apr 2005, 04:11
Location: MA

Post by nomaded »

I would suggest using Velcro, or the 3M interlocking stuff (IMO, the 3M stuff is much better than Velcro, but harder to find).

TouchStream Mini - February 26, 2002 - Sold
TouchStream Stealth - March 18, 2002 - Windows 7 Ultimate (home)
TouchStream MacNTouch (white) - July 23, 2003 - Retired
TouchStream LP - March 31, 2004 - In storage
TouchStream MacNTouch (silver) - December 1, 2004 - In storage
Stenovations Digitouch (dvorak) - 2007 - Windows 7 Ultimate (work)
Stenovations Digitouch (dvorak) - 2007 - In storage
User avatar
Site Admin
Posts: 537
Joined: 26 Apr 2005, 00:07
Location: Vienna, Austria

Post by TorbenGB »

Great idea! Not just for safety, but also for comfort. I've always been bugged about the fact that the panels slide ever so slightly around on the base, so I've attracted a nitpicking habit of realigning the base all the time :?

For this purpose, cost should not be an issue. Velcro is certainly cheaper than the 3M stuff, but it should be well worth it. :?: If someone has a link to an online store selling it, they may want to post it here.
Grizzled Veteran
Posts: 201
Joined: 13 Jun 2005, 01:40
Location: Kahalu'u, Oahu, Hawaii

Post by Rqyteqto »

Most any hardware store will stock velcro ribbon/tape. Long's Drugs even carries it. Might find it at larger or more extensive supermarkets. Ditto most of the big box office supply stores, Office Max, Office Depot, Staples, etc.

Online - ... up_id=1158

$32.59 for a 25 yard roll of 1" tape, ought take care of your lifetime needs. Don't worry about buying too much, you will always find stuff to use it for.

Here's a source for the 3M stuff. ... c=froogle2
Invent the Future
TP Diffenbach
Posts: 19
Joined: 23 Aug 2005, 20:33

Post by TP Diffenbach »

When my TS's left pad came off, I reattached it to the base with rubber cement.
Posts: 30
Joined: 27 Apr 2005, 00:35
Location: Near Reno Nevada

Post by phill »

How about putting a thin even layer of rubber cement on the base and let it dry. Then the pads can sit on that and have enough traction so they don't move around. Or get some rubber tape that is very thin and put that on the base for the pads to sit on.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest